In The Garage - MokeWerx - The Australian Moke Site

Skip to main content

Packing Wheel Bearings

A quick guide on a easy and proven method on repacking Wheel bearings. Can be used for Taper and straight but doesn't work if bearings are sealed…

Removing Driveshafts from Inboard CV's

Not a technique to use in all circumstances but knowing how to remove the drive from an inner/inboard CV(Pot Joint) while it is still in the car…

Moke Rear light - 1976, The dark edge

Around 1976 the regular Hella brand of tail ligt assembly began sporting a black edge or surround, replacing the normal plastic chrome fitted to…

Moke Rear lights

For the 14 years of production in Australia there were only four styles of rear light fitted to Mokes.

Hella Rear Light - 1977 to 1982

From 1977 to 1983 the 'square' Hella brand rear light was fitted to the Mokes that includes the reverse light in amber along with the indicator, tail…

Starter motor doesn't turn, is the starter solenoid is faulty.

The starter solenoid has the important job of connecting the starter motor directly to the battery cable to get the power to turn over the engine…

Moke Wiper Wiring - Secrets of the Twin Stalk

With the introduction of the Gal body Mokes, the old dash mounted wiper switch was replaced by a column mounted switch. This is a quick guide to how…

Moke Wiper Wiring - Secrets Revealed

This information applies to the two speed wipers with the dash mounted rotary switch. So to help with restoration or repair, here is a guide to e…

Fitting A Gemini Starter

From the factory, Mokes were fitted with a Lucas inertia starter. While they are generally pretty reliable, there are much better starters availa…

Twin Stalk Indicator Cancellation

Late mokes with the twin stalk indicator switch use two small pins under the steering wheel to cancel the indicators. This works fine until you r…